Brother PC-2800 Presser foot scale 2 Button holder plate, 1 10 mm 3/8, 2 15 mm 9/16

3.Once sewing is completed, gently pull the gimp thread to re- move any slack, and trim off any excess.

*After using the seam ripper to cut open the threads over the buttonhole, trim off the threads.

CONTENTS

BEFORE USE

Odd shaped buttons/Buttons that do not fit into the button holder plate

1

3

2

4

Use the markings on the presser foot scale to set the size of the buttonhole. One mark on the presser foot scale equals 5 mm (3/ 16'').

Add together the button diameter and its thickness, and then set the plate at the calculated value

1Presser foot scale

2 Button holder plate

3 Completed measurement of diameter + thickness

4 5 mm (3/16'')

Example:

For a button with a diameter of 15 mm (9/16''), a thickness of 10 mm (3/8''), the scale should be set at 25 mm (1'').

1	1 10 mm (3/8'')
	2 15 mm (9/16'')

2

SEWING

PATTERNS UTILITY STITCHES MAINTENANCESEWING CHART(PROGRAMMED IN MACHINE)

45