Brother PC-2800 operation manual Dart Seam, Basting

DART SEAM

1

1

J

1.Attach presser foot “J”, then sew a reverse stitch at the begin- ning of the dart and sew from the wide end to the narrow end without stretching the fabric.

1Basting

2.Do not sew a reinforcement stitch at the end. Cut the thread at the end leaving an excess 50 mm(2"), and then tie both ends together.

3. Insert the ends of the thread into the dart using a needle.

4. Iron the dart to one side so that it is flat.

CONTENTS

BEFORE USE

SEWING

PATTERNS UTILITY STITCHES MAINTENANCESEWING CHART(PROGRAMMED IN MACHINE)

51