Brother PC-2800 Twin Needle, Decorative stitches where the zigzag width can be changed, manually

TWIN NEEDLE			J
2	3	19	Decorative stitches where the zigzag width can be changed
			manually..

CAUTION

•Use only twin needles made for this machine (part code X59296-001). Other needles could break, resulting in damage.

•Do not sew with bent needles. The needle could break and cause injury.

•When using the twin needle, use the presser foot “J” regardless of what kind of sewing will be carried out.

1.Turn the main power switch to OFF, and install the twin needle

(see page 25 “Changing the Needle”).

1

1 Stopper

2.Do the upper threading. Follow the steps for threading a sin- gle needle for the first threading (see page 13 “Upper Thread-

ing”).

CONTENTS

BEFORE USE

SEWING

UTILITY STITCHES

3.Pass the thread through the needle clamp thread guide on the needle bar, then thread the needle on the left side.

Caution

The needle threader lever can not be used. Thread the twin needle by hand, from front to back. Using the needle threader lever may result in damage to the machine.

PATTERNS MAINTENANCESEWING CHART(PROGRAMMED IN MACHINE)

64