Brother PC-2800 operation manual Hemstitching, Lamp is lit 2 Lamp is lit, Five threads leave

CONTENTS

5. Illustration of finished product.

BEFORE USE

Hemstitching 2

1 2

25 26 27 28 29 30

1

27	28
1. Press the	key to turn on the LED lamp, and press the

stitch pattern switch key to select the stitch for hemstitching.

*Check that the stitch pattern switch key's LED lamp is lit.

1Lamp is lit

2 Lamp is lit

2.Pull out several threads from both sides of the 4 mm (3/16'') area which is not yet open. (Pull out four threads, leave five threads and then pull out four threads, the width of five threads is approximately 4 mm (3/16'') or less.)

1Approx. 4 mm (3/16'') or less

2Four threads (pull out)

3 Five threads (leave)

SEWING

UTILITY STITCHES MAINTENANCE

3.Sew the decorative stitch on the center of the five threads cre- ated above.

*Using a wing needle is an option.

4. Illustration of finished product.

PATTERNS SEWING CHART(PROGRAMMED IN MACHINE)

63