Brother PC-2800 Stitch Width And Length, Adjusting the stitch width, Adjusting the stitch length

STITCH WIDTH AND LENGTH

Generally suitable stitch width and length values are set automatically when a stitch is selected. If you prefer to use other values, follow the instructions below to change the values.

Adjusting the stitch width

Press the stitch width manual change key. The LED lamp will light up. Move the stitch width adjustment lever up or down. Moving the lever up increases the stitch width, and moving the lever down decreases the stitch width.

1	1	Up: Wider	1	2
	2	Down: Narrower

2

To return to the default settings (or to cancel the manual adjust- ments), press the stitch width manual change key to turn off the LED lamp.

CONTENTS

BEFORE USE

SEWING

Adjusting the stitch length

Press the stitch length manual change key. The LED lamp will light up. Move the stitch length adjustment lever up or down. Mov- ing the lever up increases the stitch length, and moving the lever down decreases the stitch length.

1	1	Up: Longer	1	2
	2	Down: Shorter
2

To return to the default settings (or to cancel the manual adjust- ments), press the stitch length manual change key to turn off the LED lamp.

In the following cases, the stitch width manual change key and the stitch length manual change key’s LED lamps will be off, and the stitch width and length will return to the default values

*When the main power switch is turned to ON.

*When a different pattern is selected after the manual settings have been made.

UTILITY STITCHES MAINTENANCESEWING CHART

CAUTION

If the stitches get bunched together, lengthen the stitch length and continue sewing. Do not continue sewing without lengthening the stitch length, otherwise the needle may break and cause injury.

MACHINE)	(PROGRAMMED	PATTERNS
	IN

30