Brother PC-2800 Setting the bobbin, Wound evenly 2 Wound poorly, Built-in thread cutter

Setting the bobbin

CAUTION

Setting the bobbin improperly may cause the thread tension to loosen, breaking the needle and resulting in injury.

1 Wound evenly

2Wound poorly

1 2

CONTENTS

BEFORE USE

1

2

1. Slide open the bobbin cover.

1Bobbin cover

2Bobbin cover release button

2.Insert the bobbin into the shuttle with the thread direction as shown in the diagram.

CAUTION

Be sure the bobbin is set so the thread unrolls in the correct direction. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or the needle to break.

SEWING

UTILITY STITCHES

1

1 2

3.Guide the thread end through the slit, then pull the thread to- ward you to cut off any excess thread.

1Built-in thread cutter

4.Close the bobbin cover by placing the left end in place and pressing down lightly on the right end so that it snaps into place.

*You can begin sewing immediately without drawing up the bob- bin thread.

PATTERNS MAINTENANCESEWING CHART(PROGRAMMED IN MACHINE)

12