Nortel Networks SRG50 manual Process map for installing and configuring an SRG

26Chapter 2 SRG50 overview

Process map for installing and configuring an SRG

Figure 3 Process map for installing and configuring an SRG

The main office is installed and running and the information to support SRG has been configured.

You have reviewed the SRG and BCM50 system requirements and documentation.

Locate the BCM50 that will be converted to the SRG.

Install the physical components, including media bay modules, cabling, telephones, and peripherals, as per the Installation and Maintenance Guide.

Configure the basic parameters of the BCM50 as per the Installation Checklist and Quick Start Guide. (see the Installation and Maintenance Guide (NN40020-302) and the Administration Guide (NN40020-600)).

Create the SRG (see SRG50 creation on page 16).

Complete the initial installation, connect the SRG to the LAN (as required) and WAN (to main office), and test the SRG system, as per the Installation and Maintenance Guide (NN40020-302).

Set up SRG administration, and carry out non-SRG-specific networking and device configuration as per the Administration Guide (NN40020-600), the Networking Configuration Guide (NN40020-603), and the Device Configuration Guide (NN40020-300).

Install and configure attached devices. See IP telephones setup and configuration on page 53 when configuring the IP telephones. See PSTN access and analog devices on page 79 when setting up analog trunks and devices.

Set up the IP telephones for SRG operation, as per IP telephones setup and configuration on page 53.

Set up the private VoIP network, as per Setting up the private VoIP network on page 65.

Configure the server-specific data for the main office call server (see the documentation for your call server).

Register each telephone with the main office and the SRG.

Troubleshoot any registration issues (Troubleshooting on page 83).

Test the telephones and analog equipment in normal mode.

Familiarize users with the services for local mode. (Telephone features in normal and local mode on page 89)

NN40140-500