Nortel Networks SRG50 manual Received numbers configuration, To map received numbers to the DN

Chapter 5 IP telephones setup and configuration 59

Received numbers configuration

The Public Received number length and the Private Received number length (see Basic parameters on page 67) determine the number of digits that the SRG retains for call processing. The retained digits are mapped to the DN using fields provided on the Target Lines panel. (For more information on target lines, see SRG50 terminology on page 20).

Note: If the retained digits are the same as the DN, the fields (Pub.

Received # field and Priv. Received # field) can be left blank.

To map received numbers to the DN

1In Element Manager, navigate to Configuration > Telephony > Lines > Target Lines (see the figure Target Lines panel on page 59).

2Select the target line of the DN for which you want to configure the received numbers.

3Double-click the Pub. Received # field, and then enter the retained received digits for calls originating from the PSTN.

4Double-click the Priv. Received # field, and then enter the retained received digits for calls originating from the private network (that is, the VoIP trunks). This number is usually the same as the DN.

Figure 10 Target Lines panel

SRG50 Configuration Guide