28Chapter 3 Task summary
iii) For calls coming in from the private network
Configuration > Telephony > Dialing Plan > Private Network > Dialing Plan - Private Network panel > Private Network Settings subpanel > Private Received number length field
and
Configuration > Telephony > Dialing Plan > Private Network > Dialing Plan - Private Network panel > Private Network Settings subpanel > Private DN length field (Private DN length is used for DPNSS applications only. See the Networking Configuration Guide
Internal Reference: Basic parameters on page 67
External Reference: Networking Configuration Guide
6Verify the line pool assignment of VoIP trunks.
In the default configuration, the VoIP trunks are assigned to line pool BlocA. Instructions in the SRG50 Configuration Guide assume that the default configuration has been maintained.
Configuration > Telephony > Lines > Active VoIP Lines > Active VoIP Lines table > Line Type column > Line Type field
External Reference: Networking Configuration Guide
7The SRG supports four analog loop trunks on the main unit*. Verify the line pool assignment of these trunks.
In the default configuration, these trunks are assigned to line pool A. Instructions in the SRG50 Configuration Guide assume that the default configuration has been maintained.
Configuration > Telephony > Lines > Active Physical Lines > Active Physical Lines table > Line Type column > Line Type field
External Reference: Networking Configuration Guide
IP telephone configuration
1Configure the registration password.
Configuration > Resources > Telephony Resources > IP Sets row > Details for Module subpanel > IP Terminal Global Settings tab
Internal Reference: Registration password on page 53
2Configure the local mode indication (Advertisement/Logo).
Configuration > Resources > Telephony Resources > IP Sets row > Details for Module subpanel > IP Terminal Global Settings tab
Internal Reference: Local mode indication on page 55
