Appendix C • Installing the DW6000 using Installer Console
1033295-0001 Revision 2 109
2. As each one-line parameter appears, enter the specific values as defined in the installation spe cification for this customer or as specified by HNS personnel and press ENTER. The next parameter will then appear. Type - and press ENTER at the prompt to go to the previous parameter. You can also skip the remaining parameters by typing \ and pressing ENTER.Creation Date: Feb 8 2002, 11:43:08
Current DW6000 Image Executing: Main.bin
IRU Software Version Number: 33
=======================================================================
Parameter Value entered Value in use
-------------------------------------- -------------- ------------
VSAT Return Path: **Inroute Inroute
Satellite Longitude in degrees: **117 117
Satellite Longitude in minutes: **0 0
Satellite Hemisphere: **West West
VSAT Longitude in degrees: *77 77
VSAT Longitude in minutes: *10 10
VSAT Longitude Hemisphere: *West West
VSAT Latitude in degrees: *39 39
VSAT Latitude in minutes: *10 10
VSAT Latitude Hemisphere: *North North
Satellite Channel Frequency: *11100 (x 100Khz) 11100 (x 100Khz)
Receive Symbol Rate: *30000000 Sps 30000000 Sps
LNB Polarization: *Vertical Vertical
LNB 22KHz Switch: *On On
Filter Rolloff: *20 20
LAN1 IP Address: *66.82.56.50 66.82.56.50
LAN1 Subnet Mask: *255.255.255.240 255.255.255.240
IP DW6000 IP Address: *66.82.24.154 66.82.24.154
SDL Control Channel Multicast Address: *224.0.1.4 224.0.1.4
VSAT Management IP Address: *10.0.0.0 10.0.0.0
Default Router IP Address: 10.0.0.10 10.0.0.0
Main Menu (<?/CR> for options):
Figure 102: Display Current Configuration Screen
Note: The Default Router Address isn’t used in most cases
and doesn’t have to be configured. The VSAT Return Path
should be configured to "Inroute."
Note: The values in the examples are for illustrative
purposes only. Do not use them to configure the DW6000.