Appendix C • Installing the DW6000 using Installer Console
98 1033295-0001 Revision 2
Installer console installation
method
Follow the steps below and refer to the illustra tions on page 99
through page 101 to install the DW6000.
In addition, confirm that TCP/IP is enabled to accept IP addresses
automatically on your installer laptop PC. See AppendixD – on
page 121.
CAUTION
Do not connect the power supply to the DW6000, or connect
the power supply to a power source, before instructed to do
so.
CAUTION
• Do not block any ventilation openings. Do not install near
any heat sources such as radiators, heat registers,
ovens, stoves, or other apparatus (including amplifiers)
that produce heat.
• Recommended ventilation space around the top and
sides of the DW6000 assembly should be approximately 6
inches. Ventilation is necessary to avoid overheating.