Appendix B • Installing the indoor equipment using dial- up commissioning
94 1033295-0001 Revision 2
If the customer cannot surf If the customer cannot surf, configure your installer laptop so its
network properties match the customer’s. Refer to Appendix D for
exact instructions for setting your network properties. Then:
1. Sta rt a Web browser on the installer laptop.
2. Enter the DW6000 IP address in the browser URL location
bar and press Enter. If the DW6000 is functioning, the User
Interface appears.
3. Enter an URL for a known Web site, such as abc.com or
cnn.com. If it appears, the DW6000 is functioning and any
problem exists on the customer’s computer. The customer’s
network properties may not be configured properly, or there
may be some other system problem. They should consult the
User Guide for support information.
Figure 84: Final cabling
Transmitcable
(SatelliteOut)
ACpower
cord
Ethernet
cable
Ethernet
Receivecable
(SatelliteIn)
Power
supply
DCpower
cord