Chapter 2 • Installing the indoor equipment
22 1033295-0001 Revision 2
8. Verify the information and select Next. The Receive Antenna
Pointing screen appears. See Fi gure 21.
Click on Display Signal Strength to see the signal quality
factor (SQF). When the signal is locked, a checkmark appears
in the Perfo rm ACP checkbox. Peak the receive pointing as
instructed in the antenna installati on manual. Click Close.
See Figure 22.
Remember that the signal may be locked but not necessarily
peaked. That is why you must carry out the instruction to
peak the signal.
9. Click Next. The Transmit Antenna Pointing screen appears.
See Figure 23.
Note: The Signal Quality window may no t appear on top.
Just minimize the other windows until you can see it.
Figure 21: Receive Pointing