ASSEMBLY
HOW TO PREPARE THE ENGINE
Fill With Oil
This Edger was shipped with a 20 ounce container of SAE30 motor oil. Add this oil to the engine before operating. To fill the crank-
case, remove the oil fill cap/dipstick and add the SAE30 motor oil DO NOT OVERFILL.
NOTE: The engine may contain a small amount of oil. When adding oil, frequently insert the oil fill cap/dipstick and check
the amount of oil in the engine. DO NOT OVERFILl.
Oil Recommendations
Only use high quality detergent oil rated with API service classification SG. SeIect the oil's SAE viscosity grade according to your ex- pected operating temperature. Although mul-
,4
4 CoIder _
5W30SAE30
How To Add The Engine Oil
1.Put the Edger on a level surface.
2.Remove the oil fill cap (Figure 5).
3.Slowly fill the engine crankcase. DO NOT OVERFILL.
How To Fill With Gasoline
Make sure that the gasoline container is dean and free from dust or other foreign ma- terial. Never use gasoline that could be stale from Iong periods of storage.
1.Remove the fuel cap.
2.Fill the fuel tank with dean, fresh, un- leaded grade automotive gasoline.
fuel container. Do not smoke
_lARNING: Always use a safety when adding the fuel mixture to
the engine. When inside an enclosure, do not fill the fuel tank. Before you add the fuel mixture, stop the engine. Let the engine cool for several minutes.
NOTE: ENGINES WHICH ARE CERTIFIED TO COMPLY WITH CALIFORNIA AND US EPA EMISSION REGULATIONS FOR ULGE ENGINES, are certified to operate on regular unleaded gasoline. Include the following emission control system(s):
EM, TWC (if so equipped). Include any user adjustable features - therefore no other adjustments are needed.
Fuel
Oil FillCap
Cap
Fuel Tank | Figure 5 |
