Craftsman 536.772301 manual Assembly, Checklist

ASSEMBLY

_" CHECKLIST

For the best performance and satisfaction from this quality product, please review the following checklist before you operate the Edger:

IIAll assembly instructions have been completed.

Check carton. Make sure no loose parts remain in the carton.

All fasteners have been properly tight- ened.

As you learn how to use the Edger, pay extra attention to the following important items:

_'P" Engine oil is at proper level.

_'P" Fuel tank is filled with a fresh, clean, regular Unleaded gasoline.

_'P" Become familiar and understand the

function of all controls. Before your start the engine, operate all controls.

IMPORTANT: This unit is equipped with an internal combustion engine and must not be

used on or near any unimproved forest-covered, brush-coveredor grass-coveredland unless the engine's exhaust system is equipped with a spark attester meeting applicable local or state laws (if any). If a spark arrester is used, it must be maintained in effective working order by the operator.

In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on fed-

eral lands. A spark arrestedmuffler is available through your nearest Sears Service Cen- ter (see the REPAIR PARTS section in this manual).

F-001102M9