OPERATION
HOW TO USE THE INDEX LEVER
1.Stop the engine and disconnect the spark plug wire from the spark plug.
2.Loosen the front wheel knob shown in
Figure 10. Slide the front wheel all the
way to the right side.F_ntWheel Knob
3.Securely tighten the front wheel knob.
NOTE: To prevent the blade from hit-
ting the wheel while trimming, make sure the front wheel is set in the ex-
treme right position.
Front Whee_
4. Disengage the index lever (see
Figure 10
Figure 11). Move the index lever to the notch marked 90°.
5. Reconnect the spark plug wire to the spark plug.
6. Start the engine.
7. Move the clutch lever to the desired trim- ming height.
running, never leave the Edger.
,_ WARNING: While the engine is Before you adjust the wheels or
change the blade position, always dis-
Index Lever
engage the cutting blade and stop theFigure 11 engine.