Chapter 1 • Introduction
41033295-0001 Revision 2
Specifications and identification of equipment

The part number label is located on the rear of the unit.

Table1 lists the specifications of the DW6000.

Table 2 shows the cable requirements for the unit. The cable

requirements are the same regardless of the type of antenna used

and are determined by the distance from the DW6000 to the

satellite antenna.

Table 1: DW6000 Specifications

Product Element Speci fication

Weight 2.4 lb (1.089 kg)
Width 1.7 in (4.32 cm)
4.5 in (11.43 cm) with pedestal base
Height 9.5 in (24.13 cm)
9.75 in (24.77 cm) with pedestal base
Depth 10.5 in (26.67 cm)
Power supply PN 1031105-0001 Rev A
Electrical requirements
• Input line voltage
• Input line frequency
• Current required
• Power consumption
100 - 240 V - 2A max
50-60 HZ AC
100 W typical
64 W
Power cords Detachable power cord for 110 VAC
outlet type
Safe operating tempera-
ture range
0 to 40 degrees C (above 5000 feet alti-
tude, reduce maximum temperature by
1 degree C per 1000 feet)
Safe operating humidity 5% to 95% non-condensing
Safe altitude 10,000 ft.
Cooling method Convection
Ports • One Ethernet LAN port supporting
10BaseT or 100BaseT operation,
RJ45 switched
• Telephone line port (DW6020 only)
Main processor • 133 Mhz
Main memory • 32MB
Flash memory • 8MB
Protocol Support TCP/IP protocol suite