Appendix B • Installing the indoor equipment using dial- up commissioning
84 1033295-0001 Revision 2
Running the DW6000 installation software, commissioning, and registering the customer
The DW6000 installer’s computer software is basically
DIRECWAY 4.0 software with some functions, such as
interacting with a browser, removed. It is used to run Websetup
and commission the customer.
There are four registration servers, one each for consumer, small
office/home office, enterprise, and GM Teleworker. Before you
select the registration server, check the work order and confirm
which service option the customer has chosen.
You will register the customer, peak the satellite signal, con nect
the customer’s DW6000, and confirm that they can surf the
Internet.
1. Connect the installer laptop PC to an analog telephone line
or alternate connection to the Internet.
2. Select Start→ Programs→ Direcway Installer→ Websetup. The
Welcome screen appears. Check the work order for the
service option and highlight the proper registration server.
Then select Next. Follow the instructions on s ubsequent
screens; the instructions below will supplement the onscreen
instructions.
If the Welcome screen does not appear, there is a problem
with the DW6000 installation. Check cable connections. If
cable connections are not the problem, restart the PC. If that
does not solve the problem, call installer support.
Figure 69: Welcome screen; choose proper registration server