46Chapter 4 CS 1000 considerations
Table 8 S1000 Main Office Settings (Sheet 3 of 3)
Field | Values | Description |
|
|
|
Node ID | 9999 (default) | Automatically written to the IP telephone firmware |
|
| when the IP telephone registers with the main |
| Range: 0 to 9999 | office. |
| Used to identify the node on the main office | |
|
| |
|
| associated with the IP telephone DN. |
|
|
|
MO Access Code Length | For CDP dialing plans: set to 0 | The number of digits to add to the BUID (DN) so |
| For UDP dialing plans: set to | the main office system can determine if the |
| incoming call is valid. | |
| length of line pool access code or | |
|
| |
| destination code in front of LOC. |
|
| Range: 0 to 34 |
|
|
|
|
To datafill the S1000 Main Office Settings panel
1In Element Manager, navigate to Configuration > Resources > Survivable Remote Gateway (see the figure S1000 Main Office Settings panel on page 46).
2Select the S1000 Main Office Settings tab.
3Enter the information in the appropriate fields.
