Nortel Networks SRG50 manual Private dialing plan

68Chapter 6 Setting up the private VoIP network

Table 15 Basic parameters (Sheet 2 of 2)

Parameter	Value	Context
SRG net mask		Configured as part of BCM50 foundation configuration.
		Configuration > System > IP Subsystem > IP Subsystem panel >
		General Settings tab > IP Settings details subpanel
IP address of		Configured as part of BCM50 foundation configuration.
SRG gateway		Configuration > System > IP Subsystem > IP Subsystem panel >
		General Settings tab > IP Settings details subpanel
VLAN		If the SRG operates as part of a VLAN, obtain the required
		identifiers from the VLAN administrator.
		Configuration > Data Services > DHCP Server > DHCPServer
		panel > IP Terminal DHCP Options tab > VLAN Identifiers subpanel
PSTN number for		Required to specify a PSTN fallback route. See Outgoing calls
dialing into the		configuration on page 74.
main office from
the SRG when in
local mode
PSTN number for		Required for main office configuration.
dialing into the
SRG from the
main office when
in local mode

Private dialing plan

For SRG operation, either a coordinated dialing plan (CDP) or a uniform dialing plan (UDP) can be configured. Nortel recommends CDP because it requires the least dialing manipulation between the SRG and the main office call server. The dialing plan choice also determines whether the DN on the SRG matches the BUID.

Dialing plans between the SRG and the main office call server must be compatible. Private dialing plan configuration is described in detail in the Networking Configuration Guide (NN40020-603).

The type of dialing plan, CDP or UDP, is determined by the main office configuration.

The path to the Element Manager panel for setting up the dialing plan is Configuration > Telephony > Dialing Plan > Private Network > Dialing Plan - Private Network panel > Private Network Settings subpanel (see the figure Dialing Plan — Private Network panel, Private Network Settings subpanel on page 69).

NN40140-500