|
| Chapter 6 | Setting up the private VoIP network 71 | |
| Table 16 Main office QoS settings (Sheet 2 of 2) |
|
| |
|
|
|
|
|
| Media parameter | H.323 settings |
| SIP settings |
|
|
|
| |
| G.723 payload size (ms) | Supported for IP telephones for local calls only. See IP | ||
|
| telephone codec and jitter settings on page 55 for details. | ||
|
|
|
|
|
| G.711 payload size (ms) |
|
|
|
|
|
|
|
|
| Incremental payload size (yes/no) |
|
| |
|
|
|
|
|
| T.38 fax (yes/no) |
|
| |
|
|
|
|
|
| Force G.711 for 3.1k audio (yes/no) |
|
| |
|
|
|
|
|
| Fax Transport |
|
| |
|
|
|
|
|
| Provide |
|
| |
|
|
|
|
|
In Element Manager, enter QoS settings for VoIP trunks through the Telephony Resources panel.
To enter the QoS settings for VoIP trunks
1In Element Manager, navigate to Configuration > Resources > Telephony Resources.
2On the Modules panel, locate the Module type column and select the IP Trunks row (see the figure Modules panel, IP Trunks on page 71).
3On the Details for Module subpanel, select the H323 Media Parameters tab or the SIP Media Parameters tab depending on which media parameters you want to configure.
4Refer to the main office QoS settings recorded in the table Main office QoS settings on page 70 and enter the appropriate values.
