13
Installation
•Component Input ports
To get better picture quality, connect a DVD player
to the component input ports as shown below.
How to connect
Connect the audio and video cables from the external equip-
ment's output jacks to the TV input jacks, as shown in the
figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source with using the TV/VIDEObutton on
the remote control. (If connected to A/V INPUT1, select
Video 1 input source).
2. Operate the corresponding external equipment. Refer to
external equipment operating guide.
Component ports
on the TV YPBPR
Video output ports
on DVD player
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
PR
How to connect
1. Connect the DVD video outputs (Y, PB, PR) to the COM-
PONENT(Y, PB, PR) INPUT jacks on the TV and connect
the DVD audio outputs to the AUDIO INPUTjacks on the
TV, as shown in the figure.
2. If your DVD only has an S-Video output jack, connect this
to the S-VIDEO input on the TV and connect the DVD
audio outputs to the AUDIO INPUTjacks on the TV, as
shown in the figure.
NOTE: If your DVD player does not have component video
output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the TV/VIDEOor COMP/RGB/DVIbutton on the
remote control to select Component 1 or Component 2.
(If connected to S-VIDEO, select the Video 1 or Video 2
external input source.)
3. Refer to the DVD player's manual for operating instruc-
tions.
External External A/V Source SetupA/V Source SetupDVD SetupDVD Setup
S-VIDEO
AUDIO INPUT
AUDIO VIDEO
VIDEO INPUT
COMPONENT 2
MONITOR
OUTPUT
A/V
INPUT1
(MONO)
DVD
/DTV
INPUT
COMPONENT 1
RL R L
RL
AUDIO VIDEO
S-VIDEO
RGB INPUT
(PC/DTV INPUT) AUDIO INPUT
AUDIO VIDEO
VIDEO INPUT
DIGITAL AUDIO
(OPTICAL)
COMPONENT 2
MONITOR
OUTPUT
A/V
INPUT1
(MONO)
DVD
/DTV
INPUT
COMPONENT 1
DVI
INPUT
PC/DVI
AUDIO INPUT
RL R L
COMPONENT1
INPUT
OUTPUT
BR
(R) AUDIO (L)
DIGITAL AUDIO
OPTICAL (R) AUDIO (L)
S-VIDEO
DVD
or
Camcorder
Video Game Set
The TV has a special signal output capability which allows you to hook up a sec-
ond TV or monitor.
Connect the second TV or monitor to the TV’s MONITOR OUTPUT. See the
Operating Manual of the second TV or monitor for further details regarding that
device’s input settings.
NOTE
• Component, RGB-PC/RGB-DTV, DVI-PC/DVI-DTV, DTV input sources cannot
be used for Monitor out.
NOTES
• Digital Audio will not work for Component 2 input source.
• Digital Audio operation has priority if Digital Audio and AUDIO L/R
are connected at the same time.
S-VIDEO IN
(R) AUDIO (L) VIDEO
S-VIDEO
AUDIO INPUT
AUDIO VIDEO
VIDEO INPUT
COMPONENT 2
MONITOR
OUTPUT
A/V
INPUT1
(MONO)
DVD
/DTV
INPUT
COMPONENT 1
RL R L
Monitor Out SetupMonitor Out Setup
or