LG Electronics DU-30LZ30 Moving the PIP sub picture, POP Picture-out-of-Picture Channel Scan

Operation

Moving the PIP sub picture

In PIP mode, press the D / E / F / G button to move the sub picture to a different location on the screen.

Adjusting Main and Sub Picture Sizes for Twin Picture

Use the D / E / F / G button to change main and sub picture sizes in Twin Picture mode.

i.e)	If the maximal adjusted
	screen is 16:9, the large
	screen appears the gray
	part at both the up and
	down sides.

If the maximal adjusted screen is 4:3, the large screen is filled with entire screen vertically as shown.

POP (Picture-out-of-Picture: Channel Scan)

-Use POP to search the programs of all the memorized channels one-by-one on the 3 PIP screen display, (while the main picture source remains the current channel). The pictures of all the programmed channels are searched with the 3 POP screen.

-Note: Run EZ Scan channel search before using POP mode.

1.Press the PIP button to activate the POP mode while in PIP mode.

•Channel selection: Use F button to enlarge the selected channel being searched on the PIP screen to shift it for viewing on the Main screen.

•PIP selection: Use D / E button to select one of 3 PIP screen pictures in POP mode.

•Input source selection for PIP: Use PIP INPUT button or Sub Input option on the SETUP menu to select an input source for the sub picture (You can’t select DTV for main and sub pic- ture simultaneously). You can only select the Analog and DTV signal for sub input source in POP mode.

2.Press the EXIT button to cancel POP mode.

F ED	TV 2-0
	TV 4-0
	TV 6-0

33