17
Operation
On-screen Menus Language SelectionOn-screen Menus Language Selection
T
Turning the TV Onurning the TV On

Turning on the TV just after installation

Turning on the TV (power cord is still connected)

1. Connect power cord correctly.
2. Press the ON/OFFbutton on the TV. At this moment, the TV is switched to standby mode.
Press the TV/VIDEO, CH (DD/ EE)button on the TV or press the POWER, TV/VIDEO,
COMP/RGB/DVI, CH (+, -), Number (0 ~ 9) button on the remote control and then the TV will
switch on.
Press the ON/OFFbutton on the TV to turn the TV on.
1. If the TV was turned off with the ON/OFFbutton on the TV
2. If the TV was turned off with the remote control and then the ON/OFF button on the TV
Press the ON/OFFbutton on the TV and then press the POWER, TV/VIDEO, COMP/RGB/DVI,
CH (+, -), Number (0 ~ 9) button on the remote control to turn the TV on.
-The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use DD/ EEbutton to select the OPTION menu.
2. Press the GGbutton and then use DD/ EEbutton to select Language.
3. Press the GGbutton and then use DD/ EEbutton to select your desired language.
From this point on, the on-screen menus will be shown in the selected language.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
NOTE
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
SETUP
VIDEO
AUDIO
TIME
OPTION
LOCK Prev.
Aspect Ratio
Caption
Caption Mode
Caption Option
Language GG
Cinema
Demo
English
Español
Français
MENU