Configuring the V2IU 4350
Configure the VoIP ALG
In order to configure the VoIP ALG the 4350 must be told where to reach the signaling servers and TFTP server on behalf of the voice devices.
1.Select VoIP ALG.
2.If using VLANs assign the ALG to a specific VLAN id using the drop down menu.
3.If you are using MGCP enter the MGCP Server IP Address, MGCP Media Gateway Port and MGCP Notified Entity Port.
4.If you are using SIP enter the SIP Server IP Address and SIP server port. The SIP server port is the port used by the SIP registrar. The default value is port 5060.
5.If you are using H.323 enter the H.323 Gatekeeper IP Address.
6.Enter the TFTP Server Address. This address is used to identify the TFTP server that contains the images used by IP phones at boot up. The 4350 performs a TFTP server relay function.
3 - 57
