Polycom V2IU 4350 user manual

User Manual V2IU 4350 Converged Network Appliance

•802.1p is not currently supported

1.Select the Network link.

2.Select Enable VLAN support.

3.Press Submit.

Caution Be careful when changing a port from 802.1 to 802.1q mode. Any 802.1 devices connected to that port (such as your management PC!) will loose access to the 4350. Port 4 is only able to receive 802.1 frames, so a PC can always be connected to this port if the configuration of the other ports is unknown.

4.Select System.

5.Select VLAN Configuration.

6.Adjust LAN Port Membership drop-down boxes to specify 802.1 or 802.1q mode, as desired. Press Modify.

If changing modes, the radio-buttons or checkboxes will change from one style to the other.

7.Under Add and configure a new VLAN enter a new VLAN ID, the 4350’s IP address within this VLAN, and the Network Mask. Press Add.

A new VLAN entry will be added to the VLAN Configuration above.

8.Depending on the mode of a physical port, assign it to one or more VLANs:

3 - 14