User Manual V2IU 4350 Converged Network Appliance
•If the T1/E1 port will be used to connect to WAN:
— T1 cable to connect the T1/E1 port to a T1 line.
Warning To reduce the risk of fire, use only 26 AWG or larger wire (e.g. 24, 22, 20, etc.) to connect the T1 port on your unit to an
•Ethernet cables to connect the LAN ports to LAN switches or to individual IP phones. They can also be used to connect the Ethernet WAN port to a WAN router, a Cable Modem or a DSL Modem, if T1/E1 port is not being used to connect to the WAN.
Desktop Installation
1.Remove the 4350 and accessories from the shipping container.
2.Place the 4350 on a flat, dry surface such as a desktop, shelf or tray.
3.Connect the power and network cables to the appropriate ports on the back of the system.
Caution To reduce the risk of fire, use only 26 AWG or larger wire (e.g. 24, 22, 20, etc.) to connect the T1 port on your unit to an
Wall-Mount Installation
1.The 4350 can be
2.Install two screws 5.9" (150 mm) horizontally apart on a wall or other vertical surface. The screws should protrude from the wall so that you can fit the appliance between the head of the screw and the wall. If you install the screws in drywall, use hollow wall anchors to ensure that the unit does not pull from the wall due to prolonged strain from the cable and power connectors.
3.Remove the 4350 and accessories from the shipping container.
2 - 2
