User Manual V2IU 4350 Converged Network Appliance
This page includes the following areas:
Item Description
Prefix Routing and Gatekeeper Neighboring table
Add a prefix
Lists rules for forwarding incoming calls based on their dialed alias.
Rules are executed in the order in which they are listed. Use the arrows to move entries up and down, or use the Index field to specify where a new or edited rule falls in the list.
Allows you to add new prefixes to the Prefix Routing and Gatekeeper Neighboring table.
Item | Description | |
|
| |
Action | Indicates whether the rule is to be added or edited. | |
Prefix | Specifies the prefix pattern to be matched against the dialing | |
| string. See <l_link>“Regular Expressions” on page 39 for details | |
| on valid patterns. | |
Index | Determines the order in which the rule is scanned in the Prefix and | |
| Gatekeeper Neighboring table. To add a rule between two rules | |
| with consecutive indexes (n and m), use the higher index (m). | |
Strip | Indicates whether the matching prefix is stripped from the dialing | |
| string. | |
Add | Specifies a string to be prepended to the dialing string. | |
Neighbor | Determines whether a location request (LRQ) is sent when this | |
| prefix matches. | |
| • | If enabled, the prefix becomes a neighboring statement. |
| • | If disabled, the incoming Q.931 Setup is forwarded to the given |
|
| address without a preceding LRQ. |
| This field is used for interoperability with other gatekeepers that | |
| may not accept a Setup without a preceding LRQ. | |
Local Zone | Provides compatibility with remote gatekeepers that are | |
| configured to accept LRQs only from sources that match its | |
| configured remote zone. If a gatekeeper is configured to accept | |
| requests only from a known source, enter the zone in this field. | |
Address | Specifies the IP address or domain name of the device to which | |
| the call is to be forwarded. | |
|
|
|
The H.323 Neighboring page includes the following buttons:
Item | Description |
|
|
Commit | Applies the settings configured on this page. |
Reset | Clears all fields and selections and allows you to enter new |
| information. |
|
|
3 - 38
