Enviro 2100 Freestanding owner manual Specifications, Model Freestanding

Specifications

WOOD STOVE SPECIFICATIONS:

Model	2100 Freestanding
Width x Depth	24” x 30” (610 mm x 762 mm)
Height with pedestal or legs	33”	(838 mm)
Height of body	22”	(559 mm)
Fire box size (depth x width x height)	211⁄2” x 18” x 12” (546 mm x 457 mm x 305 mm)
Capacity	3.1 feet3	(0.0878 meter3)
* Approximate heating area	2100 feet2 (195.1 meter2)
**E.P.A. output rating	11,800 to 34,000 BTU/hour (3,455 to 9,956 watt)
*Duration on low burn	9 to 11 hours
Weight without bricks	414 pound (188 Kg)
Weight of bricks	103.2 pound (46.8 Kg)
E.P.A. Emissions	2.9 grams/hour (0.102 oz/hour)

* Figures Will Vary Considerably With Fuel And Conditions.

**E.P.A. output is calculated from a load of fir averaged from start until entirely consumed. The actual heat output with refueling is very much greater.

CERTIFICATION: these stoves have been tested and listed by Intertek (ITS) (WH) to standards CSA B366.2/ULC-S627, ULC-S628-M93, UL 1482-1994.

CLEARANCES TO COMBUSTIBLES - FREESTANDING:

MAINTAIN THESE MINIMUM CLEARANCES TO UNSHIELDED COMBUSTIBLES*

		With Single Wall Pipe
A	From side wall to side of unit	22” (559 mm)
B	From rear wall to back of unit	12” (305 mm)
C	From adjacent wall to corner of unit	8” (203 mm)
D	From side wall to collar	31” (787 mm)
E	From rear wall to collar	161⁄2” (419 mm)
F	From adjacent wall to collar	19” (483 mm)
G	† From front of unit to edge of hearth pad	18” (457 mm)
H	† From side/back of unit to edge of hearth pad	8” (203 mm)

CAUTION: An uninsulated smoke pipe must not pass through an attic, roof space, closet or similar concealed space, or through a floor, ceiling, wall, or partition, or any combustible construction.

†FLOOR PROTECTION: If a stove is installed on a combustible floor, it must have a pedestal attached and be on a NON COMBUSTIBLE hearth pad.

		�
�		�
	�����
		�
	������
	���� ����
	�	�
����	�
����	�
	�����
	�������� ����
����		�
��������	�
	�

9