Installation

OPTIONAL FAN INSTALLATION:

This appliance when installed, must be electrically connected and grounded in accordance with local codes or in the absence of local codes, with the current CSA C22.1 CANADIAN ELECTRICAL CODE. Part 1, SAFETY STANDARDS FOR ELECTRICAL INSTALLATIONS, or THE NATIONAL ELECTRICAL CODE ANSI / NFPA 70 in the USA.

CAUTION

Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

1) Remove the fan assembly from the box and inspect

for any damage to the assembly. Contact your dealer or courier if there is damage.

2) Remove the knock out at the bottom of the back panel of the appliance by using a flat head screwdriver as a lever, hook the tip of the screwdriver under the panel beside the tabs and push the panel out.

3) Install two (2) screws into the top two holes. Place the blower assembly over these two (2) screws and

tighten. Install the two (2) bottom screws and tighten.

4) Plug the fan assembly in and check for proper operation.

DO NOT cut or remove the grounding prong from the plug. DO NOT route the power cord beneath the heater.

WARNING: This appliance is equipped with a three-prong (grounding) plug for your protection against shock hazard and should be plugged into a properly grounded three-prong receptacle.

WIRING DIAGRAM:

This is a basic wiring diagram for the option fan installation.

1)Plug the fan assembly into a three- prong (grounded) receptacle.

2)Turn the fan controller to the desired setting.

3)Once the unit has reached operating temperature, the fan temperature sensor will turn the fan on automatically.

4)When the unit cools down the fan temperature sensor will shut the fan off automatically.

�����

���

 

 

 

�����

 

�����

 

 

 

�����

 

���

 

 

�����������

����� ������

 

������

���

 

 

 

 

����������

16

Page 16
Image 16
Enviro 2100 Freestanding owner manual Optional FAN Installation

2100 Freestanding specifications

The Enviro 2100 Freestanding is an exceptional wood stove designed to combine efficiency, style, and functionality. This modern stove is crafted for homeowners seeking an environmentally friendly heating solution without sacrificing aesthetics or performance.

One of the standout features of the Enviro 2100 is its impressive heating capacity. With the ability to effectively heat spaces of up to 2,000 square feet, it provides an ideal solution for large living areas or open floor plans. The efficient heat output ensures that rooms maintain a consistent and comfortable temperature, even during the coldest winter months.

The Enviro 2100 incorporates advanced clean burning technologies that significantly reduce emissions while maximizing heat production. Its innovative design allows for a secondary combustion system that ignites and burns off unburned gases and particulates. This not only minimizes the environmental impact, but also enhances fuel efficiency, giving homeowners more warmth for less wood consumption.

Durability and craftsmanship are also key characteristics of the Enviro 2100. Constructed from high-quality steel and featuring a cast iron door, this stove is built to withstand the demands of daily use. The large firebox is designed for easy loading, accommodating larger logs for longer burn times, thus reducing the frequency of reloading.

Aesthetically, the Enviro 2100 Freestanding stove offers a range of customization options. Buyers can choose between various finishes, including classic black or a more contemporary brushed nickel, allowing them to match the stove with their home décor. Additionally, the large glass viewing window provides an alluring glimpse of the flickering flames, creating a cozy ambiance in any setting.

Safety features are thoughtfully integrated into the design of the Enviro 2100. The stove includes a built-in air wash system that helps keep the glass clean, ensuring a clear view of the fire while contributing to overall safety. Furthermore, the unit is equipped with a heat shield, allowing for closer placement to walls without compromising safety or performance.

In summary, the Enviro 2100 Freestanding is a standout choice for those seeking an efficient and stylish wood heating solution. With its impressive heating capacity, advanced clean burning technologies, durable construction, customizable design, and essential safety features, it is truly a remarkable addition to any home. Whether for functional warmth or aesthetic value, the Enviro 2100 promises to deliver an exceptional experience for years to come.