Enviro 2100 Freestanding owner manual Installation

Models: 2100 Freestanding

1 22
Download 22 pages 30.96 Kb
Page 12
Image 12

Installation

INSTALLATION:

A non-combustible floor protector is required under all freestanding units, refer to “Clearances To Combustibles - Freestanding”. When venting into a masonry chimney the floor protector must be installed directly below the chimney vent and 2” (50.8 mm) on either side of the chimney vent.

Vent the stove into a clean, lined, approved masonry chimney in good condition, conforming to local building codes or a listed 6” (150 mm) factory built chimney suitable for use with solid fuels and conforming to, ULC-S629 in CANADA or UL-103HT in the U.S.A.. Connect the stove to this chimney with a short and straight 6” (150 mm), 25 gauge or heavier, single wall black or blued steel smoke pipe. Connection to all masonry chimneys must be a metal or masonry thimble cemented in place. All smoke pipes must slope upwards, all connections must be tight and secured with three sheet metal screws equally spaced. The smoke pipe length should not exceed 40% of the chimney height above the stove.

DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.

 

��� �������� �� ������ ���� �� ����� ����� ���� �

 

�� ���� ��� ��������� ����� ����� ���� ��� �������

 

��������� �� ��� ��� �� ��� ��������

 

������� �������� ��������������� �������

 

�� ������ ��� ���� �� �������� �� ������

�� ����

 

 

 

����� ��

 

������ �� ������ ������ ����

�������

 

 

 

������� ����������

 

 

���������

 

 

��������

 

 

 

���

 

 

 

 

��������

����� ������ �� �����

 

 

 

 

 

 

���������

 

������� ��� ����������

 

�����

 

������� ���� �� �����

 

 

 

 

NOTE: In installations where there is constant or frequent high winds, install a flue damper to reduce the effect that high winds have on increasing the draft. A significant increase in draft due to high winds may cause your unit to overfire, which could be hazardous and will void the warranty.

12

Page 12
Image 12
Enviro 2100 Freestanding owner manual Installation

2100 Freestanding specifications

The Enviro 2100 Freestanding is an exceptional wood stove designed to combine efficiency, style, and functionality. This modern stove is crafted for homeowners seeking an environmentally friendly heating solution without sacrificing aesthetics or performance.

One of the standout features of the Enviro 2100 is its impressive heating capacity. With the ability to effectively heat spaces of up to 2,000 square feet, it provides an ideal solution for large living areas or open floor plans. The efficient heat output ensures that rooms maintain a consistent and comfortable temperature, even during the coldest winter months.

The Enviro 2100 incorporates advanced clean burning technologies that significantly reduce emissions while maximizing heat production. Its innovative design allows for a secondary combustion system that ignites and burns off unburned gases and particulates. This not only minimizes the environmental impact, but also enhances fuel efficiency, giving homeowners more warmth for less wood consumption.

Durability and craftsmanship are also key characteristics of the Enviro 2100. Constructed from high-quality steel and featuring a cast iron door, this stove is built to withstand the demands of daily use. The large firebox is designed for easy loading, accommodating larger logs for longer burn times, thus reducing the frequency of reloading.

Aesthetically, the Enviro 2100 Freestanding stove offers a range of customization options. Buyers can choose between various finishes, including classic black or a more contemporary brushed nickel, allowing them to match the stove with their home décor. Additionally, the large glass viewing window provides an alluring glimpse of the flickering flames, creating a cozy ambiance in any setting.

Safety features are thoughtfully integrated into the design of the Enviro 2100. The stove includes a built-in air wash system that helps keep the glass clean, ensuring a clear view of the fire while contributing to overall safety. Furthermore, the unit is equipped with a heat shield, allowing for closer placement to walls without compromising safety or performance.

In summary, the Enviro 2100 Freestanding is a standout choice for those seeking an efficient and stylish wood heating solution. With its impressive heating capacity, advanced clean burning technologies, durable construction, customizable design, and essential safety features, it is truly a remarkable addition to any home. Whether for functional warmth or aesthetic value, the Enviro 2100 promises to deliver an exceptional experience for years to come.