![](/images/new-backgrounds/1312040/31204017x1.webp)
1
Introduction
The V2IU 4350 Converged Network Appliance
The V2IU 4350 is an intelligent,
4350 provides the following important functions for converged networks:
T1 Wide Area Network (WAN) Access Router
The 4350 provides an integrated T1 CSU/DSU for small and medium office connectivity.
Note |
| The 4350E is designed for use in Australia, New Zealand, Korea and Japan. The |
|
| T1 port on the 4350E is functionally disabled through software. The T1 port should |
|
| not be connected to the telco network. |
|
|
|
| • | Fully integrated CSU/DSU |
| • | T1 support |
| • | Fractional T1 support |
• Layer 2 protocol support for: HDLC, Cisco HDLC (cHDLC), PPP, MLPPP, MLPPPoFR, Frame Relay
•
• T1/E1 framer and transceiver
— B8ZS/HDB3 zero suppression
— Response to Inband Loop codes (ANSI)
— Manual payload loop through the GUI
• External transmit clock input and receive clock output headers
• Timing: internal or external (loop times from the network)
• Provides long haul CSU or short haul DSU signaling
1 - 1