Polycom V2IU 4350 user manual System Configuration, Configure the LAN Interface

User Manual V2IU 4350 Converged Network Appliance

System Configuration

This section explains how to configure the 4350 to function in your IP network. You will configure the T1/E1 WAN interface, Ethernet interfaces, network addresses, DNS settings, default gateway, SNMP settings and change the administrative password.

1.Physically connect to the 4350 as described in Administration of the 4350 on page 2-4.

A browser-based configuration GUI should appear, as shown here.

2.Select the Network entry in the Configuration Menu.

Configure the LAN Interface

The 4350 provides an integrated 4 port 10/100 Mbps ethernet switch that can be optionally configured to support 802.1q VLANs. Integrated VLAN support simplifies the integration of the 4350 with existing VLAN-based networks. The 4350 is able to receive 802.1q-tagged packets from a downstream VLAN switch and appropriately route and process them per its firewall rules. Packets received from the WAN are placed in the appropriate VLAN based on IP address routing.

By default VLANs are not enabled and a single IP address is used for all 4 ethernet ports. The configuration of this address is as follows:

1.Enter the IP Address.

2.Enter the Subnet Mask (e.g. 255.255.255.0).

3 - 12