Configuring the V2IU 4350
Determining the maximum number of concurrent calls
The maximum number of concurrent calls that can be supported by the WAN access link is calculated using the following formula:
Max calls = (Maximum WAN upstream bandwidth * .85)/VoIP codec rate where,
Maximum WAN upstream bandwidth = value entered in step D above (in Kbps)
VoIP codec rate = 85.6Kbps for G.711 voice devices or 29.6Kbps for G.729 voice devices.
The maximum WAN upstream bandwidth is multiplied by .85 in the formula above to reduce the total bandwidth available for voice calls by 15%. This reduction is necessary because the 4350 automatically reserves 15% of the total WAN bandwidth for low priority data traffic so that it is not starved completely. Starving data traffic completely would increase the number of retry attempts and exacerbate congestion on the link during periods of peak usage.
Examples
The maximum number of G.711 voice calls supported by a T1 (1.536 Kbps) WAN is calculated as follows:
(1.536*.85)/85.6 = 15.3 or 15 total voice calls.
The maximum number of G.711 voice calls supported by a 768Kbps fractional
T1 WAN is calculated as follows:
(768*.85)/85.6 = 7.6 or 7 total voice calls
The maximum number of G.729 voice calls supported by a 256Kbps fractional
T1 WAN is calculated as follows:
(256*.85)/29.6 = 7.4 or 7 total voice calls
After determining the maximum number of voice calls CAC is enabled as follows:
1.Select the Enable Call Admission Control checkbox.
2.Enter Maximum number of calls allowed as calculated above.
3.Press Submit.
A Closer Look at Traffic Management in the 4350
The traffic management mechanisms provided by the 4350 are designed to ensure high priority
3 - 71
