Problem | Solution |
Distortion | If the transmitter is |
| connected to the headphones jack, |
| turn down the volume of the |
| connected audio/video equipment. |
|
|
| Change the radio frequency with the |
| CHANNEL selector on the |
| transmitter. |
|
|
| The headphones’ POWER indicator |
| light is weak or turned off. |
| • Charge the |
| battery or if the POWER indicator is |
| still off after charging the |
| rechargeable battery, take the |
| headphones to a Sony dealer for |
| replacement of the rechargeable |
| battery. |
|
|
| If you connect the transmitter to LINE |
| OUT or REC OUT jack of an audio |
| reproducer, make sure that the NOISE |
| FILTER switch is set to OFF. |
|
|
Loud | Move closer to the transmitter. As |
background | you move away from the transmitter, |
noise | more noise is likely to be heard. |
|
|
| If the transmitter is connected to the |
| headphones jack, turn up the volume |
| of the connected audio/video |
| equipment. |
|
|
| |
| Change the radio frequency with the |
| CHANNEL selector on the |
| transmitter, then tune the headphones |
| with the TUNING control. |
| |
| Change the radio frequency with the |
| CHANNEL selector on the |
| transmitter, then press the TUNING |
| button again. |
The headphones’ POWER indicator light is weak or turned off.
•Charge the
If you connect the transmitter to the LINE OUT or REC OUT jack of an audio reproducer, make sure that the NOISE FILTER switch is set to OFF.
Specifications
General
Carrier frequency
| 863.5 – 864.5 MHz |
Channel | Ch1, Ch2, Ch3 |
Modulation | FM stereo |
Frequency response | |
| 20 – 20,000 Hz |
Transmitter | |
Power source | DC 9 V: supplied AC power |
| adaptor |
Audio input | phono jacks/stereo mini jack |
Dimensions | Approx. 150 mm dia ⋅ 108 mm |
| (6 ⋅ 4 1/3 in.) (w/h) |
Mass | Approx. 190 g (6.7 oz.) |
Headphones | |
Power source | DC 2.4 V: |
| battery |
Mass | Approx. 240 g (8.5 oz.) incl. |
| |
Model name | |
Voltage | 1.2 V |
Capacity | 700 mAh |
Optional accessory | |
Plug adaptor | |
| monaural mini plug) |
Design and specifications are subject to change without notice.
11