Continued
2 Connect the transmitter to an AC outlet using the supplied AC power adaptor.
Notes
•Use only the supplied AC power adaptor. Do not use any other AC power adaptor.
Polarity of the plug
•When you connect the transmitter directly to a monaural earphone jack, the audio signal will not be output through the right channel. In such a case, use the separately sold
•If the connected equipment has the AVLS (Automatic Volume Limiter System) function, be sure to turn the function off when using the transmitter. Otherwise, you will have to turn up the volume of the headphones, and that may cause noise.
*WALKMAN is a registered trademark of Sony Corporation.
Charging the headphone battery
Using the headphones for the first time
When you use the headphones for the first time, charge the battery in the following manner.
1 Connect the transmitter to a power source.
Transmitter
to an AC outlet
To DC IN 9 V jack
AC power adaptor (supplied)
Place the headphone on the transmitter such that the charging pins on the transmitter engage the charging contacts on the bottom of the
The charge indicator on the transmitter will light in green to indicate that the battery is being charged.
6