NOperating the system
Listening to a program
Before listening
To prevent your ears from being damaged, first lower the volume.
1 Turn on the audio/video equipment connected to the transmitter.
If the transmitter is connected to the headphone jack, set the volume control of the audio source equipment as high as possible but not so high that the audio signal becomes distorted.
2 Remove the headphones from the transmitter.
The transmitter’s power indicator will light in green.
The headphones turn on automatically and the power indicator lights in red.
Note
If you are not going to use the headphones for the time being, turn them off by pressing the POWER button.
3 Select the radio frequency with the CHANNEL selector switch.
1 2 3 | R | A | L | B | OFF ON |
CHANNEL DC IN 9V |
|
| INPUT |
| NOISE FILTER |
1 2 3
CHANNEL
4 Put on the headphones.
Be sure to put the right housing (R) on your right ear and the left housing (L) on your left ear.
Continue to next page
9