5 Turn up the volume to a moderate level with the VOL control.

Press the TUNING button briefly for automatic tuning of the headphones. If you do not receive a clear audio signal, press it again.

 

 

 

VOL control

TUNING

TUNING

 

 

 

 

 

button

 

 

VOLUME

 

OPEN

W

 

 

 

PO

ER

 

 

 

Follow steps 3 and 5 above until the receiving performance becomes better.

Sending RF signals from the transmitter

The transmitter starts sending RF signals automatically when it detects an audio signal from the equipment connected.

If it does not detect an audio signal for more than about four minutes, the transmitter will stop sending RF signals, and the power indicator will turn off.

When the transmitter receives an audio signal again, it starts sending the RF signals, and the power indicator will light in green again.

If the audio signal is very weak, the transmitter does not send RF signals. If the transmitter is connected to a headphone jack, make sure the volume of the equipment connected is set to 5 – 6 or higher.

You may not hear the beginning of the sound from the headphones until the transmitter starts sending the RF signals after detecting an audio signal.

Notes

•If hiss is heard, move closer to the transmitter.

•You may hear some noise when you disconnect the AC power adaptor from the transmitter before taking off the headphones.

10