TUNING
POWER
4 Connect the supplied AC power adaptor to the transmitter.
Transmitter
1 2 3 | R | A | L | B | OFF ON |
CHANNEL DC IN 9V |
|
| INPUT |
| NOISE FILTER |
to DC IN 9V jack
AC power adaptor
(supplied)
to an AC outlet
5 Rest the headphones on the transmitter so that the headphones’ contact point meets the transmitter’s contact pin while making sure that the charging indicator lights in red.
Charging is completed in about 16 hours and the charging indicator goes off.
contact point
contact pin
When the indicator does not light in red
Check if the headphones are rested on the transmitter correctly. The indicator will not light in red and if the headphones’ contact point does not meet the transmitter’s contact pin resulting in no charge. Remove the headphones and replace them on the transmitter again so that the indicator lights in red.
To recharge the headphone battery after use
Place the headphones on the transmitter after use. Since the
Notes
•The transmitter automatically turns off while charging the battery.
•This system is designed to charge only the supplied rechargeable battery type
•If dry battery is installed, it cannot be charged.
•Do not attempt to use the supplied
•Charge in an environmental temperature of between 0˚C and 40˚C (between 32˚F and 104˚F).
Continue to next page
5