NOperating the system
Listening to a program
Before listening
To prevent your ears from being damaged, first lower the volume.
1 Turn on the audio/video equipment connected to the transmitter.
If the transmitter is connected to the headphone jack, set the volume control of the audio source equipment as high as possible but not so high that the audio signal becomes distorted.
2 Remove the headphones from the transmitter.
The transmitter’s power indicator will light in red.
3 Select the radio frequency with the CHANNEL selector switch.
1
CHANNEL 
2 3
4 Put on the headphones.
The power indicator on the upper part of the right housing glows red. Be sure to put the right housing (R) on your right ear and the left housing (L) on your left ear. Wear the headphones vertically on your head so that auto power on function is properly activated.
continue to next page
9GB