2-587-948-11(1)

Stereo

Headphones

Operating Instructions
Manual de instrucciones
Features
MDR-SA3000

100 kHz reproduction The newly-developed Nanocomposite HD (High Definition) Driver Unit reproduces ultra-wideband from low to 100 kHz by only one unit.

Super lightweight with frame structure
Porous housing

By adopting a porous housing with a cellulose material finished to give appropriate air-flow resistance, unpleasant resonance is minimized and eliminated some weights of the unit.

Widen headpad

By expansion of the width of the headpad to ensure wider contact area to diffuse the pressure on the head, and adoption of high elastic mesh fabric, gives a natural wearing comfort with light weight and good ventilation.

360 kJ/m3 high power neodymium magnets are used to reproduce clear mid-range sounds and wealthy low range sounds.

6N-OFC texture cord

6N-OFC, Oxygen Free Copper with super high-purity (99.9999%), is used for the core of the cord.

Precautions
Preventing hearing damage

Avoid using headphones with the volume turned up for an extended period of time. Doing so can damage your hearing. It is advisable to keep the volume at a moderate level at all times.

Road safety

Never use headphones while driving or cycling, etc. It can be dangerous to turn up the volume too much even while walking. Doing so may hinder your hearing and can be hazardous especially at level crossings or pedestrian crossings.

Caring for others

Remember not to disturb people around you with the sound leaking from your headphones. Keep the volume level moderate even in noisy places so that you will be able to hear other people when they talk to you.

Notes on usage

Do not put weight or pressure on the

 

headphones as it may cause the

 

headphones to deform during long

 

storage.

Do not subject the headphones to strong

 

shock by dropping or banging.

Handle the unit part with care.

MDR-SA3000/SA1000

© 2005 Sony Corporation Printed in China

MDR-SA1000
• 80 kHz reproduction
The newly-developed HD (High
Definition) Driver Unit reproduces
ultra-wideband from low to 80 kHz by
only one unit.
• Super lightweight with frame structure
• Porous housing
By adopting a porous housing with a
cellulose material finished to give
appropriate air-flow resistance,
unpleasant resonance is minimized and
eliminated some weights of the unit.
• Widen headpad
By expansion of the width of the

headpad to ensure wider contact area to

diffuse the pressure on the head, and
adoption of high elastic mesh fabric,

Do not leave the headphones in a location

 

subject to direct sunlight, heat or

 

moisture.

Leaving the plug dirty may cause sound

 

distortion.

Clean the headphones with a soft dry

 

cloth.

Do not use strong solvents (benzene,

 

alcohol, etc) when cleaning the

 

headphones. Doing so may cause

 

discoloration, deformation, deterioration

 

and other damages.

Newly developed low-repulsion urethane

 

earpads work best to your wearing

 

comfort at temperatures of about 10 °C or

 

higher (room temperatures). The earpads

 

may feel rather hard in the low

 

temperature settings. This does not

 

indicate deterioration of the earpads.
English
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Specifications
Type

Open air, dynamic

Driver units

50 mm, (CCAW adopted), dome type

Power handling capacity

1,500 mW (IEC*)

Impedance

70 at 1 kHz

Sensitivity

100 dB/mW

Frequency response

MDR-SA3000 : 8 – 100,000 Hz

MDR-SA1000 : 8 – 80,000 Hz

Cord

MDR-SA3000 :

3.5m (11.5 ft), 6N-OFC litz cord MDR-SA1000 :

3.5m (11.5 ft), OFC litz cord

Plug

Gold-plated stereo mini plug

Mass

Approx. 265 g (9.3 oz) without cord

Supplied accessories
gives a natural wearing comfort with light
weight and good ventilation.
How to use

Wear the headphone marked “RIGHT” on your right ear, and the one marked “LEFT” on your left ear.

LEFT

The slider can be set to one of 11 positions. Adjust to the desired position.
Note

When using the unimatch plug adaptor (supplied), attach securely by screwing fully down on the stereo mini plug.

 

Their original softness will be restored at

 

room temperature.

The earpads may deteriorate due to

 

long-term storage or use.

For changing the earpads or repairing the

 

headphones, please consult a Sony dealer.

The CE mark on the unit is valid only for

 

products marketed in the European

 

Union.

Operating Instructions (1), Warranty (1), Product Information (MDR-SA3000 only) (1), Carrying porch (1), Gold-plated unimatch plug adaptor (stereo phone plug ystereo mini jack) (1)

*IEC = International Electrotechnical Commission
Design and specifications are subject to change without notice.