General Type Driver units Impedance
Sensitivity

3-810-317-14(1)

Noise Canceling Headphones

Operating Instructions Manual de instrucciones

MDR-NC20

Owner’s Record

The model number is located at the rear side of the battery box.

The serial number is located at the both sides of the head band.

Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model No. MDR-NC20

Serial No.

Features

• Noise canceling headphones reduce ambient noise,

and provide a quieter environment to enhance audio

entertainment. Ambient sound is synthesized with

an anti-sound signal produced by the noise

canceling circuit, and reduced. (Over 10 dB is

reduced at 300 Hz.)

• Compact folding Style

• Neodymium magnets are used to deliver powerful

sound.

• Operates as passive headphone when noise

canceling circuit is not activated.

Installing a battery

1Open the lid of the battery box on the right outer side of the headphone.

2Insert one R03 (size AAA) battery by matching the + and – on the battery to the + and – in the battery box.

Listening to music

1Connect the headphones to the AV equipment.

When connecting to dual or stereo mini jacks of in-flight music services.Connecting cord (supplied)To headphone jack on airplane seatsWhen connecting to the headphones jack (stereo mini jack) of a WALKMAN, etc.

Connecting cord (supplied)

3Put on the headphones so that the ear pads cover your ears.

4Turn on the power of the AV equipment.

Notes on using on the airplane

The supplied plug adaptor can be connected to dual and stereo mini jacks.

dual jacks

stereo mini jacks

• Do not use the headphones when use of electronic

equipment is prohibited or when use of personal

headphones for inflight music services is prohibited.

Folding and unfolding the headphones
Unfolding
Folding
Troubleshooting
No sound

Check the connection of the headphones and the AV equipment.

Check that the connected AV equipment is turned on.

Turn up the volume of the connected AV equipment.

Muffled sound

Turn down the volume of the connected AV equipment.

Replace the battery.

Specifications

Dynamic, closed

30 mm dia: dome type

24 ohms at 1 kHz (when the power is on) 56 ohms at 1 kHz (when the power is off)

© 1996 Sony Corporation Printed in China

English
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

WARNING

• Plug adaptor is supplied to connect directly to stereo

or dual jack of inflight music services.

• Plug types are compatible with Sony WALKMAN*

remote controllers and stereo mini jacks of audio

and visual equipment.

* WALKMAN is a trademark of Sony Corporation.

3Close the lid.

Battery life
Battery

Sony alkaline LR03 (size AAA) battery

Sony R03 (size AAA) battery

Approx. hours

40hours

20hours

Micro plugWhen connecting to the micro jack on the remote controller of a WALKMAN, etc.

2 Turn on the power of the headphones.

The power indicator lights in red. When the

power is turned on, ambient noise is reduced, and

If you have any questions or problems concerning the system that are not covered in this manual, please consult the nearest Sony dealer.

After listening to music

Turn off the power of the headphones.

Notes

The noise canceling function is only effective for noise in the low frequency band. Although noise is reduced, it is not canceled completely.

Do not cover the microphone of the headphones with your hands. The noise canceling function may not work properly.

Precautions

Clean the headphones with a soft dry cloth.

Do not leave the plug dirty otherwise the sound may be distorted.

Be sure to bring the headphones to a Sony dealer when requiring a change of ear pads or repair work.

The CE mark on the unit is valid only for products marketed in the European Union.

Do not leave the stereo headphones in a location subject to direct sunlight, heat or moisture.

102 dB/mW (when the power is on)

100 dB/mW (when the power is off) Frequency response

 

16 – 22,000 Hz

Frequency range of active noise attenuation

 

40 – 1,500 Hz more than 10 dB at

 

300 Hz

Input cord

0.5 m cord with a gold-plated

 

microplug

Power source

DC 1.5 V, 1 ⋅ R03 (size AAA) battery

Mass

Approx. 175 g (6.2 oz) including

 

battery

Supplied accessories

Connecting cord 1m (39 3/8 in.) (a gold-plated micro jack ta gold-plated L shaped stereo mini plug) (1) Plug adaptor for in-flight use (single/dual) (1)

Carrying case (1)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

When to replace the battery

Replace the battery with a new one when the POWER indicator dims.

you can listen to music more clearly at a lower

volume.

OFF ON POWER

Microphone

The noise canceling function may not work properly unless the headphones are put on firmly.

You can use the headphones without turning on the power. In this case, the noise canceling function is not active, and the headphones operate as passive headphones.

Notes on headphones
Preventing hearing damage

Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.

Do not listen with the headphones while driving or cycling

As your headphones reduce outside sounds, it may cause traffic accident. Also avoid using them where hearing must not be impaired, for example, a railroad crossing, a site of construction, etc.

Operating instructions (1)

Design and specifications are subject to change without notice.