Sony MDS-JD320 Dig-Rst, Beep, Da-Rst, Dsel A, Dsel B, Mod, Sctx, Xlatch, Amute, Load OUT, Protect

Pin No.	Pin Name	I/O				Function
81	DIG-RST	O	Reset signal output to the CXD2650R or CXD2652AR and motor driver Reset: “L”
82	BEEP	O	BEEP PWM output (Not used)
83	DA-RST	O	Reset signal output to the D/A, A/D converter Reset: “L”
84, 85	DSEL A, DSEL B	O	Digital input selection signal output
			Laser modulation switching signal output
			Playback power: “L”, stop: “H”
86	MOD	O	Recording power:	0.5S
					2S
87	—	—	Not used
88	—	—
89	SCTX	O	Writing data transmission timing output to the CXD2650R or CXD2652AR
			Shared with the magnetic head ON/OFF output
90	XLATCH	O	Latch signal output to the serial bus
91	—	—	Not used
92	—	—	Not used
93	AMUTE	O	Line out muting output
94	LOAD OUT	O	Loading motor control output *1
95	LOAD IN	O
96	LIMITIN	I	Detection input from the limit switch
			Sled limit-In: “L”
97	PROTECT	I	Recording-protection claw detection input from the protection detection switch
			Protect: “H”
98	REFLECT	I	Disk reflection rate detection input from the reflect detection switch
			Disk with low reflection rate: “H”
99	GND	—	Ground
100	+3.3V	—	+3.3V power supply

*1 Loading motor control
Operation	IN	OUT	Brake
Pin
LOAD IN 95 pin	“H”	“L”	“H”
LOAD OUT 94 pin	“L”	“H”	“H”

— 62 —