Editing Recorded MDs
Erasing all titles on a disc (Name Erase Function)
Use this function to erase all titles on an MD simultaneously.
1Press EDIT/NO repeatedly while the deck is stopped until “All Erase ?” appears in the display.
2Press EDIT/NO again.
“Name Erase ?” appears in the display.
3Press YES.
All titles are erased.
To cancel the Name Erase Function
Press p.
You can undo a name erasion
See “Undoing the Last Edit” on this page.
You can erase all recorded tracks and titles
See “Erasing all tracks on an MD” on page 25.
Undoing the Last Edit (Undo Function)
You can use the Undo Function to cancel the last edit and restore the contents of the MD to the condition that existed before editing was done. Note, however, that you cannot undo an edit if you do any of the following after the edit:
•Press the rbutton on the front panel.
•Press the rbutton, the MUSIC SYNC button, or the
•Update the TOC by turning off the power or ejecting the MD.
•Disconnect the AC power cord.
|
| ) |
§ | 0 | fl p r |
|
|
••• | • | • | •• |
• |
| ||
• |
|
| • |
• |
|
| • |
• |
|
| • |
• |
| • | •• |
= + |
|
|
|
EDIT/NO YES
1With the deck stopped and no track number appearing in the display, press EDIT/NO repeatedly until “Undo ?” appears in the display. “Undo ?” does not appear if no editing has been done.
2Press YES.
One of the following messages appears in the display, depending on the type of editing to be undone:
Editing done: | Message: |
|
|
Erasing a single track |
|
|
|
Erasing all tracks on an MD | “Erase Undo ?” |
|
|
Erasing a portion of a track |
|
|
|
Dividing a track | “Divide Undo ?” |
|
|
Combining tracks | “Combine Undo ?” |
|
|
Moving a track | “Move Undo ?” |
|
|
Labeling a track or an MD |
|
|
|
Changing an existing title | “Name Undo ?” |
|
|
Erasing all titles on an MD |
|
|
|
3Press YES again.
“Complete” appears for a few seconds and the contents of the MD are restored to the condition that existed before the edit.
To cancel the Undo Function
Press EDIT/NO or p.