Storing the station names
— Station Memo
You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name of up to eight characters for a station.
Storing the station names
1 Tune in a station whose name you want to store.
2 Press (LIST) for two seconds.
3 Enter the characters.
1Rotate the dial clockwise to select the
desired characters.
(A nB nC n··· Z n0 n1 n2 n
··· 9 n+ n– n* n/ n\ n> n< n. n_ )
If you rotate the dial counterclockwise, the characters appear in the reverse order.
If you want to put a blank space between characters, select “_” (under- bar).
2Press (4) (n) after locating the desired character.
The flashing cursor moves to the next space.
If you press (1) (N), the flashing cursor moves to the left.
3Repeat steps 1 and 2 to enter the entire name.
4 To return to the normal radio reception, press (LIST) for two seconds.
Tip
To erase or correct a name, enter “_”
Displaying the station name
Press (DSPL) during radio reception.
Each time you press (DSPL), the item changes as follows:
zStation name* | z Frequency |
Clock Z
*If the station name of a station is not stored, “NO Name” appears in the display for one second.
Erasing the station name
1 Tune in any station and press (LIST) for two seconds.
2 Press (DSPL) for two seconds.
3 Rotate the dial to select the name that you want to erase.
4 Press (5) (ENTER) for two seconds. The name is erased.
Repeat steps 3 and 4 if you want to erase other names.
5 Press (LIST) for two seconds.
The unit returns to the normal radio reception mode.
Locating a station by
name — List-up
1 Press (LIST) momentarily.
The name assigned to the station currently playing appears in the display.
2 Press (LIST) repeatedly until you find the desired station.
3 Press (5) (ENTER) to tune in the desired station.
Note
Once the station name or frequency has been displayed for five seconds, the display goes back to its normal mode. To turn off the display, press (DSPL).
11