Adjusting the sound characteristics
You can adjust the bass, treble, balance and fader.
Each source can store the bass and treble levels respectively.
1 Select the item you want to adjust by pressing (SOUND) repeatedly.VOL (volume) nBAS (bass) nTRE (treble) nBAL
Adjust within three seconds after selecting the item. (After three seconds, the dial functions as the volume control.)
Attenuating the sound
Press (ATT) on the rotary commander or wireless remote.“ATT on” flashes momentarily.
To restore the previous volume level, press (ATT) again.
Tip
The unit decreases the volume automatically when a telephone call comes in
Changing the sound and display settings
You can set:
•Clock (page 6).
•CT (Clock Time) (page 15).
•D.Info (Dual Information) to display the clock and the play mode at the same time (on) or to display the information alternately (off).
•Amber/Green to change the illumination colour to amber or green.
•Dimmer to change the brightness of the display.
—Select “Auto” to dim the display only when you turn the lights on.
—Select “on” to dim the display.
•Contrast to adjust the contrast if the indications in the display are not recognizable because of the unit's installed position.
•Beep to turn on or off the beeps.
•RM (Rotary Commander) to change the operative direction of the controls of the rotary Commander.
—Select “norm” to use the rotary remote as the
—Select “rev” when you mount the rotary remote on the right side of the steering column.
•A.Scrl (Auto Scroll) (page 7, 19).
1 Press (SHIFT).2 Press (2) (SET UP) repeatedly until the desired item appears.Each time you press (2) (SET UP), the item changes as follows:
Clock nCT nD.Info nAmber/Green n Dimmer nContrast nBeep nRM nA.Scrl
Note
The displayed item will differ depending on the source.
3 Press (4) (n) to select the desired setting (for example: ON or OFF).
4 Press (SHIFT).
After the mode setting is complete, the display goes back to normal playback mode.
EN
Functions Other
17