Setting the clock automatically

The CT (Clock Time) data from the RDS transmission sets the clock automatically.

1 Press (SHIFT), then press (2) (SET UP) repeatedly until “CT” appears.

SET UP

2 Press (4) (n) repeatedly until “CT on” appears.

The clock is set.

SET UP

3 Press (SHIFT) to return to the normal display.To cancel the CT functionSelect “CT off” in step 2 above.

Notes

•The CT function may not work even though an RDS station is being received.

•There might be a difference between the time set by the CT function and the actual time.

Other Functions

Using the rotary commander

The rotary commander works by pressing buttons and/or rotating controls.

You can control an optional CD or MD unit with the rotary commander.

By pressing buttons (the SOURCE and MODE buttons)

(SOURCE)

EN

(MODE)

RDS/Other

 

Each time you press (SOURCE), the

Functions

 

source changes as follows:

 

Tuner nCD nMD

 

Pressing (MODE) changes the operation in the following ways;

• Tuner: FM1 nFM2 nMW nLW

•CD unit: CD1 nCD2 n…

•MD unit: MD1 nMD2 n…

Tip

When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander.

15