By rotating the control

SEEK/AMS control

Rotate and release to:

–Skip tracks.

–Tune in stations automatically.

Rotate, hold, and release to:

–Fast-forward/reverse a track.

–Find a station manually.

By pushing in and rotating the control

PRESET/DISC control

Push in and rotate the control to:

–Receive preset stations.

–Change discs during MD (CD) playback*1.

Push in, then rotate and hold for a moment to:

–Enter the GP*3 skip mode. Within 2 seconds, push in and rotate again for continuous skip.

During playback of a CD containing MP3 files*4Push in and repeat rotating quickly to:

– Change discs one by one.

Push in, then rotate and hold for a moment to:

–Enter the album skip mode. Within 2 seconds, push in and rotate again for continuous skip.

*1 Only if the corresponding optional equipment is connected.

*2 If your car has no ACC (accessory) position on the ignition key switch, after turning off the ignition, be sure to press and hold (OFF) until the display disappears.

*3 Available only when an MD containing groups is inserted in this unit and played.

*4 Available only when optional CD unit with the MP3 file control function is connected.

Changing the operative direction

The operative direction of controls is factory-set as shown below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

Press (SEL) for 2 seconds while pushing the VOL control.

Note

If you press (SEL) for 2 seconds while pushing the VOL control, “NORM” or “REV” appears in the display.

–“NORM” is to use the rorary commander at the factory-set position.

–“REV” is to use the rorary commander when it is mounted on the right side of the steering column.

20