Additional InformationMaintenanceFuse replacement

When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.

Fuse (10 A)

Warning

Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.

Cleaning the connectors

The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 8) and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged.

Main unit

Back of the front panel

Notes

•For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch.

•Never touch the connectors directly with your fingers or with any metal device.

Removing the unit1 Remove the protection collar.1Detach the front panel (page 8).2Engage the release keys together with the protection collar.

Orient the release key correctly.

3Pull out the release keys to remove the protection collar.2 Remove the unit.1Insert both release keys together until they click.

Face the hook inwards.

2Pull the release keys to unseat the unit.3Slide the unit out of the mounting.

23