Getting Started

Installing the unit and an optional monitorFirstly, install and connect the unit and an optional monitor.

This unit can be operated using the displays that appear on the unit and/or the optional monitor. Note that this manual includes instructions concerning displays on both unit and/or optional monitor.

Unit

Optional monitor

For details, see the supplied installation/ connections manual.

Note

Be sure to install the optional monitor safely, and in a place where it does not obstruct the driver’s view.

Resetting the unit

Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.

Detach the front panel (page 13) and press the RESET button with a pointed object, such as a ball-point pen.

RESET button

Note

Pressing the RESET button will erase the clock setting and some stored contents.

Performing initial setup

OFF SOURCE

Volume control dial

After resetting, the display for initial speaker setup appears.

Be sure to set correctly following the procedure below to enjoy the various sound functions of this unit.

To skip the initial setup, press (OFF)/ (SOURCE), or insert a disc.

Note

The initial setup display automatically disappears if no operation is performed for 30 seconds.

During setup procedure, it is canceled if no operation is performed for 15 seconds.

1Press the volume control dial in the initial setup display.

2Rotate the volume control dial to set the center speaker connection status, then press it.

Select “C ON” if the center speaker is connected, or select “C OFF” if not.

3Rotate the volume control dial to set the subwoofer connection status, then press it.

Select “SW ON” if the subwoofer is connected, or select “SW OFF” if not.

12